.png){kind=icon}
Instructional Videos
Instructional Videos
Creating a Bioartifical Construct with the Tissue Train® System
This video shows how to create a 3D collagen cell-seeded construct (or bioartifical tissue) with a linear Trough Loader™ and the Tissue Train® System. After the construct has polymerized, the FX-6000™ Tension System can be used with an Arctangle® Loading Station™ to apply uniaxial strain to the construct.
Compression Baseplate Assembly
This video details how to assemble your Flexcell® Compression Baseplate for use with 6-well BioPress™ culture plates.
Setting Up and Running a Drying Filter Regimen
This video details how to setup a regimen in the FX-6000™ software to run with a drying filter that is in-line with the Flexcell® FlexLink®.
Connecting a Drying Filter to the FX-5000™ FlexLink®
This video details how to connect a drying filter to the Flexcell® FlexLink®.
Connecting the Vacuum Pump and Pressure Reservoir
This video details how to connect a vacuum pump and Flexcell® pressure reservoir to your FX-6000™ Tension System.
Connecting a Water Trap in-line with the Flex Out Tubing
This video details how to connect a Flex Out water trap in-line with the Flex Out tubing in between your BioFlex® baseplate and Flexcell® Tension FlexLink®.
Connecting a BioFlex® Baseplate to a Tension FlexLink®
This video details how to connect a BioFlex® baseplate with a Flexcell® Tension FlexLink®.
Note: This video is for FlexLinks® with quick release ports (FX-5000™ units with serial number 50015241 and upward and all FX-6000™ units)
Connecting a Water Trap in-line with the Flex In Tubing
This video details how to connect a Flex In water trap in-line with the Flex In tubing in between your BioFlex® baseplate and FX-6000™ Tension FlexLink®.
Connecting the Pump and Power Control Cables on a Tension FlexLink®
This video details how to connect the power and pump control cables to the FX-6000™ Tension FlexLink® box.
Connecting Two Tension FlexLinks® to One Computer
This video details how to connect two FX5K™ Tension FlexLink® to a single computer.
Connecting One Tension FlexLink® to the Computer
This video details how to connect one FX-6000™ Tension FlexLink® to a single computer.
Connecting a BioFlex® Baseplate to a Tension FlexLink®
This video details how to connect a BioFlex® baseplate with a FX-6000™ Tension FlexLink®.
Tension BioFlex® Baseplate Assembly
This video details how to set-up a BioFlex® baseplate with Loading Stations™ and 6-well culture plates for use with a FX-6000™ Tension FlexLink®.
FlexFlow™ Assembly
This video details how to assemble your Flexcell® FlexFlow™ device and associated tubing to run in the following configurations:
1) Flow and stretch mode with the FX-6000™ Tension System connected in line or
2) Flow only mode.
Osci-Flow® with Streamer® Assembly
This video details how to assemble your Flexcell® Osci-Flow®, Streamer®, and associated tubing to run with a MasterFlex Peristaltic Pump.
Streamer® Assembly
This video details how to assemble your Flexcell® Streamer® and associated tubing to run with a MasterFlex Peristaltic Pump.